Hi all,
I just converted my Black Horse Cap232 from 35MHz to 2.4G.
When I ran up the engine I had massive radio interferance.
The Rx was in the same place as the 35MHz one and I had a satalite even further aft to increase seperation from the ECU and the Rx.
I am using a JR 12x Tx and have the aerials on the main Rx horizontal in the same axis as the main wing tube, and the satalite aerials vertical.
I am using two batteries, one for the gear and another one for the engine.
The two batteries are beside each other in the model.

I am using an Evolution Petrol engine.

Any suggestions as to the cause or solution greatly received.

Cheers,

</p>