RCU Forums - View Single Post - engine generated interferance on 2.4
View Single Post
Old 06-05-2009 | 10:47 AM
  #7  
acam37's Avatar
acam37
Senior Member
My Feedback: (16)
 
Joined: Jan 2004
Posts: 543
Likes: 0
Received 0 Likes on 0 Posts
From: lufkin, TX
Default RE: engine generated interferance on 2.4

I had bad RF interference with my Spektrum AR7000 RX and the cause was the cap on the plug wire was not pushed down all the way on the plug. I'm using the 1/4 x 32 plug and the wire cap secures like a glow starter. Push down and twist to lock it down. Also someone told me a cracked plug will cause interference.