Just double checked my set up Futaba S3305 servos all round, 2 on rudder, 2 on elevator, 2 for wing 1 throttle 1 on choke. 8in total, 2100 aa 4.8 on ignition and a 4,100 sud c 6 volts for the rx which is an Ar7100.

Thats it total nothing else in there.

Just put the wings on the scales 4lb 4 oz with wing tube. Just done the same with the fuzz it was 13lb 4oz so 17lb 8oz total dry weight. Sorry for the confussion. That is the full setup.

So is it still weight or the c of g to far forward. When i did pattern flying the symtoms would indecate rearward c of g.