laiosto,

See the following - posts 481- 488 in http://www.rcuniverse.com/forum/m_73...tm.htm#8616288. This is how I did it on a 1/4 scale Aeronca Champ (a Precedent kit, which is a virtual clone of the Nosen kit.) The struts on a citrbria are almost identical to those on its ancestor, the Aeronca Champ. These struts are fully functional, and my design allows them to stow away by folding flat onto the wing for transport. This makes for quicker setup at the field.

The build this was posted to was that of my friend SEBO, who posted just above. He was building his Nosen Champ at the time earlier this year.

Regards,

Randy L.