RCU Forums - View Single Post - From model to drawing - best method? (vintage pattern plane)
Old 11-11-2009 | 03:50 AM
  #15  
bem
My Feedback: (1)
 
Joined: Feb 2009
Posts: 1,688
Likes: 0
Received 2 Likes on 2 Posts
From: SWEDEN
Default RE: From model to drawing - best method? (vintage pattern plane)

Hi Joakim,

I have Model Airplane News plan for Mach 1. You can buy it from MAN plans service.
http://modelairplanenews.com/ME2/dir...6E1BAD96EB2CBD
There is a PDF file there you open, search the PDF file for "Norm Page" and You will land on the page for Mach 1.

If You have trouble finding it I can copy my plan (or I can send You a PDF so You can take it to a plotting office like Arkitektkopia and have it printed in A0 format (or similar full scale format).
If You prefer Midwest Mach 1 plan I'm sure it can be found also on internet.
I have myself a Mach 1 short kit in transit to me now from Eureka Aircraft:
http://www.eurekaaircraft.com/plan_kits/machone.htm
I built a Mach 1 in 1975 so it is time for a new "bird" now.

/Bo