West .50V1 bench run
[link=http://www.youtube.com/watch?v=QWhahZdRxfw]West .50V1 test run[/link]
Been tuning the header/Mac's pipe setup. Turns out I was flying too long before, no wonder I thought the Demon was slow. This is running nicely on the 8.0x9.25 flight prop now, so I'll cut back on pitch and bring ground rpm up to 20 - 20.5k and tune the system to that. Then fly it on the heavier pitch props. Time for an IMC on this one too..
MJD