ORIGINAL: OttoKranz
Hi all,
finally I found a way through the wing for the lights and servo cable. As I thought the passage for the lights was simple but for the servo wires I had to use a little chain (no way in other ways) because in my Viper (we all know they are not all equal) there is a very tiny passage on the middle of the wing.
I have done a scheme hoping it will help[sm=thumbs_up.gif]
The question marks are ''obscure lands''
Ciao
Alessandro
Alessandro, you lucky one
I didn't have that hole, I made a small hole right after the wing-tube to reach the leading-edge area.
Who know what my second wing will bring