3000 kv HEAT PROBLEMS>>HELP NEEDED.
Giday all..
i have just recently purchased and mounted a laser 3000 kv brushless moter that came in a kit with a novotech 75 amp esc with thermo / and 2> 3 plate dualsky power 2200mAh 11.1V batteries,
The original 1520 kv moter had a water cooled collar inbetween the mount and the engine that i have also put back on the boat along with binding the moter with the rubber pipe from the collar to try to disperse some of the heat as the boat is not even in the water for 3>5 mins and it does its safty heat moter shut down thing ,so i bring it in to the bank and the moter is untouchable!!!
I have tryed many things now >even drilling out the water pick up on the rudder to get more flow but still to no avail!!! some suggestions would be nice before i smash it!!!!!! lol lets not get to that stage!! ( to many hours)