I went out today to fire it up for the first time...after flipping and flipping for an hour, no go....I had to back both needles out almost 5 turns and of course it ran rich as heck..Soon as I would try to close them, it would shut off and would'nt restart unless I backed them out again..Took the carb apart to look and sprayed it out with some aerosol carb cleaner..I believe the carb brand is a hilo, definitely not a walbro...Also the reeds were off a little on the block..They werent covering the slots all the way, they were off to one side a little....Ok am I missing something as to why it wont run? Gas is fresh and new, battery is new and good...