RE: Extreme 88
Hey Joe,
Good idea on the epoxy filling method for adjusting incidences on the anti-rotation pins. I was wondering how the heck I could fill the holes slightly and file to get them exact and never really thought of the epoxy filling trick. Thanks for the tip.
BTW OP, I wouldn't worry about the screws being off. Quite a few ARF's I've seen/read about have this issue. Because they don't set your incidence (assuming your anti-rotation pins are really tight and incidence is solid), just redrill em as needed. Doing what Joe suggests is the best method if you want a really solid hole, but they're really just there to hold the stab on; not for AOA.
Looks like a nice plane dude!