Just maidened my Super Skybolt today and it was well on its way to becoming one of my favorites when the wooden mount that hold the cabane brackets let loose and the upper wing removed itself from the plane and she drillled into the ground. I would not be upset or even write this if I'd been haulin the mail or abusing this plane, but I had just pulled the throttle back to idle for final approach. She started to drop speed then the wing left. Upon examination of the wreckage I found the Cabane wood supports had almost no CA on them.I always go through every ARF and glue or reinforce where you can but you really can't get to this area. The plane flew like a dream.Just wondering if any one else had had this misfortune.