RCU Forums - View Single Post - Spektrum servo question

04-28-2010 | 10:43 AM

#17

booker-RCU

My Feedback: (43)

Joined: Dec 2001

Posts: 568

Likes: 0

Received 0 Likes on 0 Posts

From: Chehalis, WA

RE: Spektrum servo question

Quote:

ORIGINAL: tclaridge

Help with Spektrum A6020 servo:

I am building a Sebart Wind to compete with (not able to go full 2M yet) and it will be electric. I looked at digital servos, and the Spektrum seemed like a great value. I used the A6010 for the ailerons and they seem fine. However, I bought a 6020 for the rudder, and there is a lot of slop at center. There is about a 1-2 degree ''clunk'' of slop.

Is this because of the titanium gear, or did I get a bad servo? The A6010s do NOT have any slop. I am going to contact HH on this, and may end up replacing the A6020. Anyone have an idea why there is so much slop?

Of course make sure the slop is not in the control surface. I have just installed 4 of the 6020's and no slop at all. Just an excellent servo. So possibly a bad servo.

Reply Like