RCU Forums - View Single Post - Newbie Question about control surfaces
View Single Post
Old 05-06-2010 | 03:19 PM
  #8  
Lnewqban's Avatar
Lnewqban
 
Joined: Apr 2007
Posts: 4,057
Received 0 Likes on 0 Posts
From: South Florida
Default RE: Newbie Question about control surfaces

ORIGINAL: eric278

LNEWQBAN....Honestly, I have none, and jumped into this with the wrong plane. I read AFTER I ordered, to never start with a jet like this. Last nite, after putting this one together, I went back to bananahobby and ordered a BlitzRCWorks Skysurfer, http://www.bananahobby.com/1937.html , it's much more beginner oriented, and I'm going to just let this jet sit until I get the trainer and practice on it. I also ordered a Simulator so I can practice on the computer before I even try the trainer....all in all, I fell into the ''trap'' I read about too much and saw a video of a nice jet and just figured I would buy one...I'm just glad I cought myself and got on the right path instead of just going out to the park and trying to fly this jet like I see in other horror (and funny) stories on here.
Much better choice, indeed.
It is just a clone of the Multiplex EasyStar.
You are going to love and learn from that model.

The EDF will be OK later, it just need some improvements, maybe adding another (or two) small servo(s) for the elevator.

Here you can find previous threads related to this model from BH:

http://search.rcuniverse.com/search....archwhere=both

You could contact by PM or E-mail to some of the members posting there that have put this F-22 together.

Best luck!