Fuel tank set-up!
<div></div><div>So I am somewhat familiar with how an RC tank sets up. Currently, in my trainer it is an open engine set up, plenty of access. I disconnect the pressure line and the fuel line to the carburetor, then fill the tank threw the fuel line over spilling into a small external overflow tank, (waste no fuel) then hook it all back up again and fly, repeat over and over. So my question is soon I will have more sophisticated set up’s that will not allow or at least be very cumbersome to do it this way. I have seen some fuel line fillers that are Y's, and you just fill threw it. Being most tanks only has three inlets, one for carb, one for pressure and one for overflow. So what is the preferred way to set up a tank?</div><div></div><div>Thanks</div><div></div><div>TB</div>