I'll add to the confusion here, since I have been trying to understand this, and asking endless questions of Don (Woodie). I do have a proportional brake, CC HV85 and run an outrunner (Pletty). I also don't understand why one would set an idle with an electric and a set up such as this. With my brake function set to 70%, the prop only stops completely at the entry to a stall before a spin and only on the ground at landing. I do need to add throttle for a stall turn, but the brake makes really nice slow downlines now, compared to when I had no brake.

That's my story and I'm stickin to it

Dale