RE: Radio controlled servo?
I didn't post myrequirementsone by one. Also I'm not a camel jockey so I can't be a terrorist. The reason I'm not saying what it is that I'm making is because what I'm making hasn't been created before. What I need:
1. A small motor that can be controlled by my computer.
2. Needs to be connected to the PC through some kind of wireless communication.
3. Motor and wireless receiver has to be powered with battery.
4. Control board hooked to the PCcan be hooked to AC power.
5. Will need to control multiple motors and the motors will NOTbe connected together.
6. It would also be great if the computer could determine what position the motor is in.
Sorry if I didn't give all the information needed before.