I built the SE for my first kit and my first aerobatic plane(after my Avistar). It was a pretty easy build, but make sure you have no binding where the pushrods go from the servo arms through the first former in the fuse. My nyrod had too much of an angle from the servo arm to the former, and kinked on maiden which relieved me of my up elevator(I didn't need it anyway!). Needless to say it wasn't pretty. But, lesson learned... WATCH THOSE NYRODS!



Regards,
Philip

P.S. You could use drywall as a building surface...

P.S.S. I have exclusively used Thunder Tiger .46 Pros since the first time I bought one. They have outrageous power, and after broken in, I start mine with a chicken stick on just about first flip every time.