Hey guys,
I decided to run Heng Long T-80 metal tracks on my Tamiya Pershing. Problem being, my Tamiya Pershing now runs like a Heng Long. I was only provided 81 links per side. While that's the same count on the Tamiya plastic tracks,apparentlyit's too tight as metal. So now the tank wobble a bit as if the tracks are too tight, even when adjusting the idler. I'm not sure if this is the root of the problem, the guide teeth of the sprocket match up to the end connectors of the track. Maybe I'm being too finicky...

Anyway, hoping someone out there has 2 spares with the end cap's and pins to sell. If you do, please PM me!

Thank you
Tony<br type="_moz" />