<span style="font-family: Comic Sans MS">somehow i thought you were talking about that way. another question... how much trimming was necessary to get the cowl to fit on your plane? i had to do quite a bit for it to go on far enough to not see the ply inserts on the side of the nose. i'm not sure if it needs to go on that far, but even the circumference of the nose area was alot bigger than the inside of the cowl. i put the ply inserts on at the same place as shown on the plans, but i couldn't even get the top of the cowl over the fuselage to begin with. that's why i have the turtle deck at the very forward still removed. did i do something wrong with it? everything was built over the plans.</span>