Fun fly profile
02-15-2004 | 05:33 AM
#1
Thread Starter
Junior Member
Joined: May 2003
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
From: fsfdsdfsdf, LA,
Fun fly profile
i have some questions about the mani wing profil of my fun fly.
How much thickness must i have to fly in 3d and how much spread
span is 1400mm
length is 1400mm
motor is os46FX
thx
How much thickness must i have to fly in 3d and how much spread
span is 1400mm
length is 1400mm
motor is os46FX
thx
02-15-2004 | 02:08 PM
#3
RE: Fun fly profile
If you have to ask -by all means - copy from existing fun fly stuff.
For the record tho - the airfoil can be as thin as you want -
The thin ones will do more stuff -such as snap on command.
The BUT is - the typical BARF funfly is very light with a very dull ,fat foil which is numb to attitude changes.
This makes it far easier to fly .
For the record tho - the airfoil can be as thin as you want -
The thin ones will do more stuff -such as snap on command.
The BUT is - the typical BARF funfly is very light with a very dull ,fat foil which is numb to attitude changes.
This makes it far easier to fly .
