thrust line question
07-26-2004 | 11:55 AM
#1
Thread Starter
Joined: Feb 2003
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
From: kcmo
thrust line question
Hello all-
1/4 scale Dynaflight Flybaby- Saito 100
I scratch built a cowl, and I was a bit long- so instead of cutting the cowl, I added a 1/4 inch piece to my motor mount. In doing so, I threw the thrust line off center to the right by about 3/16. This plane already has about 3 degrees right thrust built in-
How critical is that 3/16 off the center thrust line? Suggestions? Or should I not sweat it? Comments appreciated-
Cheers,
Brett
1/4 scale Dynaflight Flybaby- Saito 100
I scratch built a cowl, and I was a bit long- so instead of cutting the cowl, I added a 1/4 inch piece to my motor mount. In doing so, I threw the thrust line off center to the right by about 3/16. This plane already has about 3 degrees right thrust built in-
How critical is that 3/16 off the center thrust line? Suggestions? Or should I not sweat it? Comments appreciated-
Cheers,
Brett
