Originally Posted by franklin_m
(Post 12587546)
talk about how ineffective I am, nobody listens, etc. On the other hand, some seem to see me as a one-man wrecking crew .
Originally Posted by grognard
(Post 12587543)
MA should seriously consider revoking your membership for cause.
Originally Posted by franklin_m
(Post 12587535)
because YOU are a five digit AMA demi-God,
Originally Posted by grognard
(Post 12587568)
Your sense of self importance leads you to present a false choice.
It's probably what FAA considered as they're throwing our hobby away for their privacy, control and free airspace as higher priorities than read this stuff and take us as a worthy group. When you display this misfit type behavior, you've captured the essence of why many have flown outside of AMA clubs for years and you've given people no invitation or interest that the clubs have any desirable qualities for them to be part of. All it takes is this sort of thing to ruin it. If they risk this sort of meet and greet or atmosphere walking in as a beginner, who in their right mind would? This simply adds to the problem of flying rogue whether they're safe or not, following any guidelines whatsoever, all becomes a guess, just to avoid aggressive or passive aggressive behavior and conflict that surfaces, reinforcing the FAA changes you're about to see happen. They can't take us seriously when this is the most common demonstration of how we talk about any random topic online and start with these personal attacks publicly. |
Originally Posted by Giant Flyer
(Post 12587550)
What a clown
|
Originally Posted by J330
(Post 12587576)
Another forum thread gone bad where two or three take things too far with insults and posturing themselves to be more important or more correct than the other person. No one walks away to be the wiser man. Everything else combined, real or imagined, couldn't persuade a new person more to avoid wanting anything to do with this hobby, which includes membership to RCU, RCG, or the AMA clubs from where these attitudes extend. This is the predictable outcome found in so many threads online in our RC world.
It's probably what FAA considered as they're throwing our hobby away for their privacy, control and free airspace as higher priorities than read this stuff and take us as a worthy group. When you display this misfit type behavior, you've captured the essence of why many have flown outside of AMA clubs for years and you've given people no invitation or interest that the clubs have any desirable qualities for them to be part of. All it takes is this sort of thing to ruin it. If they risk this sort of meet and greet or atmosphere walking in as a beginner, who in their right mind would? This simply adds to the problem of flying rogue whether they're safe or not, following any guidelines whatsoever, all becomes a guess, just to avoid aggressive or passive aggressive behavior and conflict that surfaces, reinforcing the FAA changes you're about to see happen. They can't take us seriously when this is the most common demonstration of how we talk about any random topic online and start with these personal attacks publicly. |
Originally Posted by J330
(Post 12587576)
...and start with these personal attacks publicly.
All just my opinion of course, and others are free to disagree. |
Honestly though, when it come's to these forum's who is the common denominator on all these anti-ama faa hot button issues.... Just saying my 2 pesos...
|
Originally Posted by grognard
(Post 12587568)
Your sense of self importance leads you to present a false choice. It's basically "conduct prejudicial." If a Naval officer had issues with an new program, or alleged misconduct on the part of his superiors; and took his case to the tabloids rather than addressing the matter "through channels"; his career would suffer accordingly. The military can and has court martialled individuals when such conduct was blatant enough.
Originally Posted by grognard
(Post 12587568)
You've stated the AMA is doing more harm than good, that the hobby is dying anyway, and the threat due to model airplanes is real. Right. Fine. Have the integrity to act on your convictions and get out. Do not sell your equipment; destroy it so no malefactor can buy it and commit mayhem with it.
Originally Posted by grognard
(Post 12587568)
If this is too much for you, at least have the decency not to use any FRIA that does not meet the standards you proposed for public access. Obey the limitations you would impose on others.
Thank you for your kind advice, but I choose not to follow it. |
Originally Posted by franklin_m
(Post 12587535)
If your audience is ONLY those who are already members, who recognize a low member number vs a high member number, you are right. On the other hand, if you're using them as sort of advertising, then the audience will not recognize the significance of a five digit member number vs a six digit member number ... because THEY'RE NOT MEMBERS ... in which case this might be worth while.
I defer to your exhaustive expertise about all things aviation, advertising, cost controls, managment, policy making, legal and regulatory, marketing, human behavior etc. ... because YOU are a five digit AMA demi-God, while the rest of us are mere mortals with six digit numbers. One more thing ... given the minutes from the latest EC meeting, with lots of "...declining...", "...going down...", etc. (a 'picture' of financial health and good management), the sticker may be one easy one to put on the budgetary chopping block. Yes, members will recognize that I am a long time member my my 5 digit AMA number. As non members go, they usually couldn't care less about my flight box or transmitter case, they are usually looking at my custom built, high quality, beautifully finished and flown airplane that has my AMA number incorporated into the paint/covering job. When they ask what AMA 22554 means I explain it to them. https://cimg8.ibsrv.net/gimg/www.rcu...cf686a303f.png |
Originally Posted by speedracerntrixie
(Post 12587635)
Yes, members will recognize that I am a long time member my my 5 digit AMA number. As non members go, they usually couldn't care less about my flight box or transmitter case, they are usually looking at my custom built, high quality, beautifully finished and flown airplane that has my AMA number incorporated into the paint/covering job. When they ask what AMA 22554 means I explain it to them.
But that's right. AMA continues to lose members, and continues to see declining member revenue, and continues to see declining advertising. I can hardly wait to see how the five digit AMA number solves that one. But I forget, I'm sure you've got a magic wand, something issued only to AMA royalty like you. |
;) Gents , please remember this is supposed to be the non fighting thread . I know the whole FAA/AMA/ hobby decline thing is both stressing and distressing , and it's quite easy to let the tensions come out whenever and wherever , but I'd really like to see this one thread remain positive , if we could do that ?
|
With all due respect , I would suggest you direct your request to the guy who is dishing out the majority ( by a large margin ) of disrespect towards other members and posting off topic.
|
"If ya wanna stop a bunch of mechanically inclined people from arguing , show em something SO cool they'll be too amazed to argue"
And so , coming at ya , here's Goodyear's light up tires . Really ? Light up tires ? Your BSing me here init4fun , right ???? Nope , for real and dead serious , in the late 1950s / early 1960s Goodyear experimented with translucent rubber with the express purpose of lighting the tires from within , a way cool prehistoric forerunner to today's (not quite as cool) "underglow" lights seen on custom cars . They fielded several test cars fitted with the new tires which were a hit everywhere they were shown . In the black & white picture a young lady adjusts her stocking by the light of the tires in New York circa 1961 (if you look close you can see the wire running into the wheel hub that brought power to the 20 bulbs mounted to the inside of the rim) , and in the color shot is a much later custom car sporting a set of the translucent light up tires . Sadly , they never went into full production as both cost and traction issues forced the abandonment of the project sometime in the mid 1960s , but man oh man would I just LOVE a set of these for my Firebird !!!! https://cimg3.ibsrv.net/gimg/www.rcu...a0bf448f0d.jpg https://cimg4.ibsrv.net/gimg/www.rcu...1d904f50e0.jpg |
Quite interesting indeed, I was not aware that illuminating tires were ever tried. Honestly I think it quite amusing how when I post a picture of an airplane that I designed, built and have won masters pattern with on a remote controlled airplane site that it should ruffle someone so badly. Think about that for a moment. Are people really so petty that they feel the need for cheap shots at somone sharing their works of art to fellow members?
|
Originally Posted by init4fun
(Post 12587664)
;) Gents , please remember this is supposed to be the non fighting thread . I know the whole FAA/AMA/ hobby decline thing is both stressing and distressing , and it's quite easy to let the tensions come out whenever and wherever , but I'd really like to see this one thread remain positive , if we could do that ?
...No need for stickers to show how long anyone has been a member, your AMA number provides that info. |
Post #19 led off with:
Originally Posted by franklin_m
(Post 12587496)
Mine go straight in the trash.
Originally Posted by franklin_m
(Post 12587677)
And that was followed by a pile on of sorts.
Originally Posted by franklin_m
(Post 12587677)
It demonstrates to me at least that no matter what, anything I post even when constructive and non-controversial is met with snide responses from virtue signalers.
Now, on the happy side: I'm about to consume an enormous piece of French silk pie! |
Originally Posted by grognard
(Post 12587680)
Constructive start, wasn't it?
Originally Posted by speedracerntrixie
(Post 12578955)
...I have to admit that I have always tossed them...
Originally Posted by init4fun
(Post 12578984)
...I began throwing them away myself...
Originally Posted by grognard
(Post 12579020)
...When the pile gets too thick, they'll go in the trash...
Originally Posted by mach5nchimchim
(Post 12579306)
...I've tossed mine ... I never really considered having a AMA sticker a badge of honor...
All of which reflected people throwing them in the trash. I guess it's "constructive" for YOU to say you throw them in the trash, but when I do it, you opine:
Originally Posted by grognard
(Post 12587680)
Constructive start, wasn't it?
Originally Posted by grognard
(Post 12587680)
Yes, you piled on Speed after he politely disagreed with you in #20.
Originally Posted by grognard
(Post 12587680)
And it demonstrates your essential hypocrisy to practically everyone else.
Originally Posted by grognard
(Post 12587680)
Now, on the happy side: I'm about to consume an enormous piece of French silk pie!
|
So much for this being a tire thread.
Originally Posted by speedracerntrixie
(Post 12587676)
I designed, built and have won masters pattern with
|
Originally Posted by J330
(Post 12587686)
So much for this being a tire thread.
Remarkable. I struggle to get wrinkles out of Monokote on the wingtips of a kit build to this day, or sand the wing tip blocks evenly, or get the turtle deck covered the way I like it in one color...but I stick it out to fly and it looks good 10 feet away! Thanks, the goal is to enjoy your hobby. As long as you are doing so you are ahead of the game. |
Originally Posted by speedracerntrixie
(Post 12587689)
Thanks, the goal is to enjoy your hobby. As long as you are doing so you are ahead of the game.
R_Strowe |
Originally Posted by speedracerntrixie
(Post 12587689)
Thanks, the goal is to enjoy your hobby. As long as you are doing so you are ahead of the game.
|
Originally Posted by R_Strowe
(Post 12587707)
Speaking of enjoying the hobby, does anyone have an idea if Coverite 21st Century fabric is still available?
Here it is on my 1/6 scale Nieuport 28: https://cimg2.ibsrv.net/gimg/www.rcu...c61becf9d7.jpg https://cimg5.ibsrv.net/gimg/www.rcu...9e84348e65.jpg |
Originally Posted by franklin_m
(Post 12587719)
Even those of us that are lowly six digit AMA numbers? Flying control line this afternoon?
Yes Franklin, my hope is that if you do to flying today is that you enjoy yourself. Regardless of what you may think I do not look down upon anyone based on what they fly. |
Originally Posted by speedracerntrixie
(Post 12587744)
Yes Franklin, my hope is that if you do to flying today is that you enjoy yourself. Regardless of what you may think I do not look down upon anyone based on what they fly.
|
Originally Posted by franklin_m
(Post 12587719)
Even those of us that are lowly six digit AMA numbers? Flying control line this afternoon?
https://cimg1.ibsrv.net/gimg/www.rcu...93c76ce31d.jpg |
I was planning on some sailplane flying tomorrow afternoon, depends on how much work I can get done on the new pattern airplane build. Got a decent amount of motivation going by ordering the 6 servos, motor and ESC for it this morning. Build thread here:
https://www.rcuniverse.com/forum/ele...gent-kits.html |
Originally Posted by speedracerntrixie
(Post 12587635)
Yes, members will recognize that I am a long time member my my 5 digit AMA number. As non members go, they usually couldn't care less about my flight box or transmitter case, they are usually looking at my custom built, high quality, beautifully finished and flown airplane that has my AMA number incorporated into the paint/covering job. When they ask what AMA 22554 means I explain it to them.
Astro |
All times are GMT -8. The time now is 12:40 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.