MMAJ

Good Afternoon,

I've recently acquired a Rich Models Burt Rutan Quickie ARF. Has anyone ever assembled and flown one of these?

rutanman

My Feedback: (9)

I know old thread, but just in case:

See older threads (some highlights below):
- CG in manual is off - CG should be around 78mm
- control throws on elevator should be at least + or - 3/4 inch
- control throws on ailerons should be at least + or - 1/2 inch
- on a canard, elevator goes up - plane pitches down, and elevator goes down - plane pitches up (reverse of a conventional tail)