reversed servo
06-12-2005 | 10:57 AM
#1
Thread Starter
Junior Member
Joined: Oct 2003
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
From: Southampton,
MA
reversed servo
Hi
First airplane calling for reversed servo for the flaps. Does this mean that I just put the arms on the same side? Ultra stick, quad ailerons,JR xp6102 radio.
First airplane calling for reversed servo for the flaps. Does this mean that I just put the arms on the same side? Ultra stick, quad ailerons,JR xp6102 radio.
06-12-2005 | 11:31 AM
#2
Senior Member
Joined: May 2003
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
From: Springfield,
TN,
RE: reversed servo
Hay Pokey:
I would use a reversing Y harness to keep the geometry same on both sides. you could put the servos in like you asked but the control arms would have to be different lengths thus different movement from side to side. unless you put one servo box in the wing farther forward. Make sense?
Miloh.
I would use a reversing Y harness to keep the geometry same on both sides. you could put the servos in like you asked but the control arms would have to be different lengths thus different movement from side to side. unless you put one servo box in the wing farther forward. Make sense?
Miloh.
