i just picked up a seagull models PC-9 but i need c/g and control throws values as far as c/g where to check it being a tapered wing

thanks in advance for all replies
Andy
[email protected]

could someone please e-mail me the manual I wanna fly this weekend

The CG should be 10 CM aft of the leading edge at the wing root. I'll have to check on the throws when I get a chance to pull out the manual.

cg is at 8cm, from leading edge fus, rudder 3/4 from center elavator is at 3/4 from center ali is at 3/16 up&down i hope this helps