WM T34 build question
#2
Senior Member
RE: WM T34 build question
Unless they changed something, the stab is supposed to be epoxied in place. Sometimes their instructions aren't exactly the most clear.
#5
Senior Member
Join Date: Jul 2004
Location: MADILL,
OK
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
RE: WM T34 build question
I think you are mistaken the tail is screwed on with a machine screw into a blind nut.
I would at least add thread lock if nothing else but always glue mine in place with epoxy and use the screws too.
I think these WM planes in this class are some of the best values out there!
I would at least add thread lock if nothing else but always glue mine in place with epoxy and use the screws too.
I think these WM planes in this class are some of the best values out there!
#6
Member
Thread Starter
Join Date: Apr 2006
Location: Greenwood,
MO
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
RE: WM T34 build question
step 8 in my version of the instructions uses a 3x25mm pan head wood screw....I think I am going to epoxy it for peace of mind.