DP Ultimate Question.
06-15-2003 | 11:15 AM
#1
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 1,381
Likes: 0
Received 0 Likes
on
0 Posts
From: Edison, NJ
DP Ultimate Question.
Hi all.
For you DP Ultimate owners, I would like to know what servo's you all used.
I have 4 9202 for the wings a 3003 for the throttle.
But what would be good for the rudder and the elevator's?
Any other tips for putting this bad boy together?
For you DP Ultimate owners, I would like to know what servo's you all used.
I have 4 9202 for the wings a 3003 for the throttle.
But what would be good for the rudder and the elevator's?
Any other tips for putting this bad boy together?
06-15-2003 | 02:15 PM
#2
Senior Member
My Feedback: (31)
DP Ultimate Question.
i am running on a 6 volt system. Here are my spec for a 4.8 volt system.
45 oz on 4.8 wings
90 oz on elevator jr 8101
155 on rudder jr 8411
517 jr on throttle
2700NMHi battery, os-160 running various prop in the 18 x 6 -18 x 8, and 19 x 8 props. I pined the firewall with 1/8 dowels. Everything else was stock build.
45 oz on 4.8 wings
90 oz on elevator jr 8101
155 on rudder jr 8411
517 jr on throttle
2700NMHi battery, os-160 running various prop in the 18 x 6 -18 x 8, and 19 x 8 props. I pined the firewall with 1/8 dowels. Everything else was stock build.
06-15-2003 | 11:12 PM
#7
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 1,381
Likes: 0
Received 0 Likes
on
0 Posts
From: Edison, NJ
this is the system I am using in my DP
KOK3270 Gas Flight Pack Special 2
Part Number: LI-POGFP2
https://www.fmadirect.com/site/fma.h...roducts&cat=28
Part Number: LI-POGFP2
https://www.fmadirect.com/site/fma.h...roducts&cat=28
