Control throws for Something Extra
#2

My Feedback: (4)
Joined: Sep 2005
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
From: Fredericksburg,
VA
Per GP instruction manual:
CG is 5 1/4" (133mm) from the leading edge.
3D Control Throws
If setting up your Extra 330S 1.60 ARF with 3D throws, you should be able to switch to high or low rate throws during flight in case you find the 3D throws too extreme.
3D Rates
ELEVATOR: 2" [50mm] up 2" [50mm] down
RUDDER: 6" [150mm] right 6" [150mm] left
AILERONS: 1-1/2" [38mm] up 1-1/2" [38mm] down
Hope that yhelps
CG is 5 1/4" (133mm) from the leading edge.
3D Control Throws
If setting up your Extra 330S 1.60 ARF with 3D throws, you should be able to switch to high or low rate throws during flight in case you find the 3D throws too extreme.
3D Rates
ELEVATOR: 2" [50mm] up 2" [50mm] down
RUDDER: 6" [150mm] right 6" [150mm] left
AILERONS: 1-1/2" [38mm] up 1-1/2" [38mm] down
Hope that yhelps



