LIFE charger question...
04-14-2016 | 06:45 PM
#1
Thread Starter
LIFE charger question...
Hi, I have an Imax B6 charger which states that it is LIFE compatable but I think it uses the LIPO setting. Is this charger ok for LIFE battrries, or do I need another brand charger?? If so, any suggestions?? Thanx, Fast....
04-15-2016 | 05:53 AM
#2
My Feedback: (11)
If it's LIFE it should have a LiFe or A123 setting
http://www.ittgroup.ee/files/IMAX_B6_manual.pdf
Page 10 shows that you can select LiPo, LiIon, or LiFe
http://www.ittgroup.ee/files/IMAX_B6_manual.pdf
Page 10 shows that you can select LiPo, LiIon, or LiFe
Last edited by BarracudaHockey; 04-15-2016 at 05:56 AM.
04-15-2016 | 05:59 AM
#3
My Feedback: (27)
Joined: Sep 2002
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
From: Athol,
ID
I have the same charger and charge my Life battery's on it. The instructions are poor and hard to figure out so you have to experiment somewhat, Just keep going thru until you find the Life
program window, then the settings being sure you set the proper voltage, etc.. It takes a little time to learn but works well for me and I am not an expert! (for sure)
program window, then the settings being sure you set the proper voltage, etc.. It takes a little time to learn but works well for me and I am not an expert! (for sure)
