Prop nuts
11-16-2004 | 07:54 PM
#1
Thread Starter
Prop nuts
Hey guys, I have a question..
I am wondering which size Dave Brown prop nut (they have diff sizes like 10x1.0mm or 6x1.25) to get for my OS .46AX... I am going to buy the Dave brown 2 1/4" spinner.
Thanks all
Shane
I am wondering which size Dave Brown prop nut (they have diff sizes like 10x1.0mm or 6x1.25) to get for my OS .46AX... I am going to buy the Dave brown 2 1/4" spinner.
Thanks all
Shane
11-16-2004 | 08:02 PM
#2
Senior Member
Joined: May 2003
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
From: Leipsic, OH,
RE: Prop nuts
gp300:
The majority of the 40-46 size motors have 1/4-28 threads on the crank for a prop nut...just check with the manual which one you need. I have a TT gp.42 - OS 46LA - MDS .40 - Super Tigre 40 and all take the 1/4-28 so that seems to be about the stock size used on most of the 40 sized motors.
Madd_Maxx
The majority of the 40-46 size motors have 1/4-28 threads on the crank for a prop nut...just check with the manual which one you need. I have a TT gp.42 - OS 46LA - MDS .40 - Super Tigre 40 and all take the 1/4-28 so that seems to be about the stock size used on most of the 40 sized motors.
Madd_Maxx
11-17-2004 | 11:50 PM
#4
My Feedback: (47)
Joined: Jan 2004
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
From: Luverne,
AL
RE: Prop nuts
I am assuming it is an aluminum spinner. This is the adapter:
http://www2.towerhobbies.com/cgi-bin...?&I=LXB952&P=V
http://www2.towerhobbies.com/cgi-bin...?&I=LXB952&P=V
