I am soon to be ordering my 7c, and would like a close up pic so i can see what everything is and does.

Thanks alot
Chad

Newb,
What's wrong with the picture and description on Tower's website??
[link]http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGAE9**&P=0[/link]

I

Try this too:

http://www.futaba-rc.com/sellsheets/...-sellsheet.pdf

and here is the manual:

http://www.futaba-rc.com/manuals/7c-manual.pdf

and

http://www.futaba-rc.com/manuals/7c-addendum.pdf


This should keep you busy for a while.

thanks guysThos helped alot. Still need to read the manual. I am about to go to the hobby shop to get some biulding supplies and such for the four star a new gallon of nitro and more..

Umm...these are pics of my 7CAP...sorry for the blurry/low res pics...camera batts almost dead....

thanks. What switches do what

All the switches are assignable to any channel, to do anything. Exept for the trainer switch...that is umprogrammable...the trainer is on switch F.

it seems to be more than 3 switches, why is that?

I think there are 6 switches, 1 dial and of course 2 sticks. The 6 switches are for like separate dual rates, flaperon mixing, etc. and the dial is for flaps or flaperons...so you have enough swithes for all the separate funtions...

For example, I have triple rates on switch G, couple flaps-to-elevator on switch D, engine kill on switch E, trainer on switch F, and just aileron dual rates on switch B, and airal camera servo on switch A.

Its beginning to rain here and I just remebered my airplane, radio, and field equipment is out there!!! [X(] I was tuning, fixing, and breaking in a engine in my backyard...