Go Back  RCU Forums > RC Airplanes > Beginners
 Beginner Radio Question: Dymond? >

Beginner Radio Question: Dymond?

Community
Search
Notices
Beginners Beginners in RC start here for help.

Beginner Radio Question: Dymond?

Thread Tools
 
Search this Thread
 
Old 10-13-2006 | 11:18 AM
  #1  
Thread Starter
Junior Member
 
Joined: Apr 2005
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
From: Rochester Hills, MI
Default Beginner Radio Question: Dymond?

*I am dual posting this in Beginners forum and Q's and A's forum to help get some responses.*

Has anyone ever heard of, know anything about, or used a cheap radio called "Dymond 4 FM Micro"? On the actual radio in the picture it says "Dynam". You can see it here: http://www.rc-dymond.com/index.php?productID=974

I've seen this radio tx advertisment in Fly R/C for a couple months now, and I was weary of it, but would like to think about it if it seems legit. I just dont like trusting people who don't even have a phone number on their website. Seemed fishy.

But with tx, rx, crystals, 2 micro servos and pc connection cord for $69 seemed like a good deal, but I want to see if anyone had anything to say about it.

Thanks for all the help!
Old 10-13-2006 | 11:25 AM
  #2  
piper_chuck's Avatar
My Feedback: (12)
 
Joined: Jun 2004
Posts: 8,044
Likes: 0
Received 3 Likes on 3 Posts
From: Columbia, SC
Default RE: Beginner Radio Question: Dymond?

I've never heard of them, but there is a phone number, in the upper right corner of the page you referenced.
Old 10-13-2006 | 11:36 AM
  #3  
Senior Member
 
Joined: Jul 2002
Posts: 3,770
Likes: 0
Received 2 Likes on 2 Posts
From: Spartanburg, SC
Default RE: Beginner Radio Question: Dymond?

You can get a Hitec just about as cheap. MUCH better radio.

Dr.1
Old 10-13-2006 | 11:40 AM
  #4  
 
Joined: Nov 2004
Posts: 11,703
Likes: 0
Received 1 Like on 1 Post
From: Memphis, TN
Default RE: Beginner Radio Question: Dymond?

No known facts but a wild guess (WAG) is that it is made in China or similar low-cost labor country. Quality unknown. Backyard flyer type radio only not for most nitro powered planes. Not much to lose if it turns out to be a lemon depending upon value of plane that may be lost.[]
Old 10-13-2006 | 01:11 PM
  #5  
RCKen's Avatar
RCU Forum Manager/Admin
My Feedback: (9)
 
Joined: Jul 2002
Posts: 28,236
Likes: 0
Received 31 Likes on 27 Posts
From: Lawton, OK
Default RE: Beginner Radio Question: Dymond?

Ok, looking at your ad brings a few thoughts/concerns to mind

[ul][*] The ad doesn't indicate what frequency range it's in (72 Mhz, 75 Mhz, or 27 Mhz). 72 Mhz is for aircraft use, 75 Mhz is for ground use, and 27 Mhz is for both. If you get a radio that is in the 75 range you could end up getting shot down by somebody using a car in the area.[*] The ad states "Rechargeable battery and charger Combo only $ 25". This indicates to me that the radio runs on AA alkaline batteries. If this is true it can be dangerous for use in an aircraft. This because the spring loaded battery clips that are used can actually lose contact with the batteries due to the vibration of the engine causing the plane to fly out of control. Also, using alkaline batteries can get expensive very quickly. [*] Lack of bubby box facilities. It doesn't look like it has any way to connect a buddy box to this radio, which can make training to fly with this radio difficult.[*] The ad states "2 Micro servos 8 g light and small 4+6 Micro receiver". This indicates that it's intended for a park flyer setup. I don't know what your intended use is for this radio, but you plan to use it for a nitro powered plane you will at least have to replace the servos as the "micro" servos included with the radio won't be big enough to fly this with. In addition, the "micro" receiver may not have the range needed to fly a nitro powered plane and may need replaced as well.[*] Lack of support. Since it's not a "name brand" that most people use (i.e. Futaba, Hitec, Airtronics, or JR) you may find your options for repair are limited. It looks like it may be one of the new "China" brands that are showing up on the market.
[/ul]

As most have said above (and yourself included) I'd be a bit weary of this deal. Since you didn't indicate your intended use it makes it a bit more difficult to make a judgement, but if you plan on a park flyer this radio might be a "maybe". But if you are planning on flying glow powered aircraft I would stay away from it. If you look at Tower Hobbies you can get the bare bones Tower Hobbies brand radios for a pretty good price. While they say Tower Hobbies on them they are made by Futaba so you are getting a name brand radio.

Hope this helps

Ken
Old 10-13-2006 | 01:54 PM
  #6  
carrellh's Avatar
Senior Member
 
Joined: Mar 2003
Posts: 6,544
Likes: 0
Received 0 Likes on 0 Posts
From: Garland, TX
Default RE: Beginner Radio Question: Dymond?

I think Dymond has some good items, and their radio may be fine, but I'd spend the extra to go with a known brand.

If your planned model is a lightweght electric "park flyer" type, here is a link to a Futaba 4 channel system for 99.99
http://www2.towerhobbies.com/cgi-bin...I=LXGAE8**&P=0
One Futaba 4YF 4-channel FM radio system with charger, transmitter NiCd battery, frequency flags, neck strap, switch harness, two S3110 servos with four point horns, R114F receiver, and transmitter and receiver crystals
A Receiver NiCd or battery box is NOT included because radio system is designed for Park Flyers and thus power will be provided to the Rx via the BEC Electronic Speed Control (ESC)

Old 10-13-2006 | 02:36 PM
  #7  
Senior Member
 
Joined: Feb 2003
Posts: 1,555
Likes: 0
Received 0 Likes on 0 Posts
From: Lake County, CA
Default RE: Beginner Radio Question: Dymond?

This dealer has been around for several years. I knew a couple of people who shopped there and I heard no bad comments.
There were three RC stores in that area - them, Hobby People and Hobby Warehouse. Don't know if Hobby Warehouse is still around.

I don't know a thing aboout the radio.
Good Luck,
KW_Counter
Old 10-13-2006 | 02:50 PM
  #8  
 
Joined: Nov 2004
Posts: 11,703
Likes: 0
Received 1 Like on 1 Post
From: Memphis, TN
Default RE: Beginner Radio Question: Dymond?

http://www.hobbywarehouse.com/

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.