Battery Wiring HELP!
08-28-2007 | 07:25 PM
#1
Thread Starter
Senior Member
My Feedback: (13)
Joined: Jul 2005
Posts: 2,322
Likes: 0
Received 0 Likes
on
0 Posts
From: Nutley,
NJ
Battery Wiring HELP!
I am trying to make leads for an old Ace Digipace Cycler. I have the Ace adapter cable(2 wires Red Black) and Female Futaba J with 3 Wires coming out of it(Red Black White). How can I make this work? Do I just not connect the white? Will this work? HELP
08-28-2007 | 11:14 PM
#5
Senior Member
Joined: Jan 2007
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
From: Tracy,
CA
RE: Battery Wiring HELP!
The white wire is the SIGNAL wire when it is between the receiver and the servo, because something has to tell the servo whether to go left or right, and how far.
Red and black just carry power.
Red and black just carry power.
08-29-2007 | 06:22 AM
#6
RE: Battery Wiring HELP!
ORIGINAL: Bad_Daddy
The white wire is the SIGNAL wire when it is between the receiver and the servo, because something has to tell the servo whether to go left or right, and how far.
Red and black just carry power.
The white wire is the SIGNAL wire when it is between the receiver and the servo, because something has to tell the servo whether to go left or right, and how far.
Red and black just carry power.
