receiver battery
08-07-2009 | 04:54 PM
#3
Member
Joined: Nov 2007
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
From: galway-, IRELAND
RE: receiver battery
i have been using a 6v battery for 6 months on mine and have had no problems at all (futaba 2.4ghz), an best of all servos working quicker, a big difference. wont buy a 4.8v pack again!.
08-07-2009 | 05:46 PM
#4
Senior Member
Joined: Feb 2006
Posts: 3,204
Likes: 0
Received 0 Likes
on
0 Posts
From: Poland,
OH
RE: receiver battery
Most receivers can handle 6v batteries with no problem.
There are some servos, mostly digital, that can't. Check the specs on your equipment to be sure.
There are some servos, mostly digital, that can't. Check the specs on your equipment to be sure.
08-08-2009 | 07:35 AM
#5
RE: receiver battery
In case you didn't know, A five cell battery reading 6V could be anywhere from 80% full to almost drained. 6V is the nominal voltage, so the voltage fully charged is around 7V.
