Engine Probs
#26
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
From: Wigan, UNITED KINGDOM
Hi there
Doh I was in Bed when the postman came with the new engine I ordered AAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHH. I have hunted him down and he is going to drop it off once he gets back to his car as the box was to big to carry around on the rest of his round. So if he comes back I should have my engine in the next 30 to 45 mins.
Doh I was in Bed when the postman came with the new engine I ordered AAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHH. I have hunted him down and he is going to drop it off once he gets back to his car as the box was to big to carry around on the rest of his round. So if he comes back I should have my engine in the next 30 to 45 mins.
#27
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
From: Wigan, UNITED KINGDOM
Hi there
Just got the engine but the carb is facing the wrong way so it looks like I will have to turn it around before I fit it DOH oh what fun (even the picture on the box shows it the right way around DOH). Will have to got to LHS and see what sealents they have or maybe a car shop as they will have the right stuff.
Just got the engine but the carb is facing the wrong way so it looks like I will have to turn it around before I fit it DOH oh what fun (even the picture on the box shows it the right way around DOH). Will have to got to LHS and see what sealents they have or maybe a car shop as they will have the right stuff.
#28
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
From: Wigan, UNITED KINGDOM
Hi there All
Well sorted out the carb took about 10 secounds LOL, Fitted the eninge without any othere problems. I have just tryed to start the engine and the rotor start broke DOH, so I have to refit the pull start or get my dads drill to start it up.
Well sorted out the carb took about 10 secounds LOL, Fitted the eninge without any othere problems. I have just tryed to start the engine and the rotor start broke DOH, so I have to refit the pull start or get my dads drill to start it up.
#29
Senior Member
Joined: Mar 2004
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
From: Chilliwack, BC, CANADA
The temp gun is very handy, and a good investment. It's more peace of mind to know exactly what is going on with your engine in regards to how rich/lean its running and overall effect on temperature. And it sure looks a lot more professional than sitting there spitting all over your motor.
Jaggy
Jaggy
#30
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
From: Wigan, UNITED KINGDOM
Hi there All
Whent out today with my Buggie and Temp Gun and tunned the engine, the temp gun made a lot of difference while tunning as I was able to check the engine temp nearly all the time and now have the engine running at about 215 F/ 225 F. There is pleanty of smoke and a lot of power from the engine as well (some of the otheres where I go checked there eninges and found that they were running a bit hot so they richened them up a bit).
Whent out today with my Buggie and Temp Gun and tunned the engine, the temp gun made a lot of difference while tunning as I was able to check the engine temp nearly all the time and now have the engine running at about 215 F/ 225 F. There is pleanty of smoke and a lot of power from the engine as well (some of the otheres where I go checked there eninges and found that they were running a bit hot so they richened them up a bit).
#31
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
From: Wigan, UNITED KINGDOM
Hi All
Well 1 mounth later and a well nearly a new engine as they repaired the old one
well they put my old cooling head and carb onto a new engine and gave me it. So I am happy as I now have a spare engine just in case.
Well 1 mounth later and a well nearly a new engine as they repaired the old one
well they put my old cooling head and carb onto a new engine and gave me it. So I am happy as I now have a spare engine just in case.



