NT-16 Settings
03-22-2006 | 03:39 PM
#1
Thread Starter
Senior Member
Joined: Mar 2006
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
From: StaffordStaffordshire, UNITED KINGDOM
NT-16 Settings
Just got the manual and look at the settings. - http://img209.imageshack.us/img209/3094/124ve.jpg
My car's NT-16 has been run in but still has problems running, is the engine always made to run at thease settings no matter what?
You can see more detail at this post here - http://www.rcuniverse.com/forum/m_4063332/tm.htm
My car's NT-16 has been run in but still has problems running, is the engine always made to run at thease settings no matter what?
You can see more detail at this post here - http://www.rcuniverse.com/forum/m_4063332/tm.htm
03-29-2006 | 11:08 PM
#2
Senior Member
Joined: Apr 2003
Posts: 1,516
Likes: 0
Received 0 Likes
on
0 Posts
From: City of Industry,
CA
RE: NT-16 Settings
Factory:
Top: 3 1/2 turns out
Bottom: FLUSH
After Break in:
Top: 3 turns out
Bottom: 1 - 1/2 turn in from FLUSH
Try to above setting. These are just recommended setting. You will still need to adjust it accordingly to your local temp. alltitude, and fuel you are using.
Top: 3 1/2 turns out
Bottom: FLUSH
After Break in:
Top: 3 turns out
Bottom: 1 - 1/2 turn in from FLUSH
Try to above setting. These are just recommended setting. You will still need to adjust it accordingly to your local temp. alltitude, and fuel you are using.
