hi
im in need of some baseline settings for my matrix buggy.
diffs?
shocks?
toe in?
camber?
ride height?

and any other ones that are needed

cheers, ned

Try here:
[link=http://www.cenracing.com/race/setup.html]http://www.cenracing.com/race/setup.html[/link]

i did, too specific as i dont know what the surface of the new track will be like.

cant any of the team drivers hlep me out?

Sorry it took so long to reply to your post .here is my setup that i use.

Diffs f5 m5 r3 i dont use the cen oil it is thicker than other diff oils.

Shocks 30 weight all around.

Shocks 2nd hole on the lower outer hole front and rear and the outside hole on the a arms.

I hope this helps you.

Dennis

Cen racing, TQ fuel.

thanks alot.

will try it out today. how much difference would running 1 in the rear be compared to 3?

Ned try this setup. I ran it yesterday at the Best of the West shootout and had the fastest car on the track. PERIOD!

Front, NEW #2 pistons with Losi 45wt shock oil. Shocks in the stock CEN Location (upper shock mount middle, lower shock mount inside on the arm).

Rear shocks NEW #2 piston with Losi 40wt shock oil. Shocks in the upper middle and lower arm inside. Also, DONT run the rubber shock booties. I have found that they hold any dust in and change the PACK rate of your shock. The small amounts of dirt that would get in your shock are stopped by the "O"-rings.

I run the Kyosho KANI LSD diff up front with the Kyosho LSD oil. I run the CEN Matrix Aluminum diff housing middle and rear with 5,000wt Kyosho diff oil center, and Mugen 3,000 wt oil in the rear of my buggy. I run the CEN matrix stock blue springs.

I am also testing a new tank design and will give you specifics VIA email or PM. NOT on the open forum. my email is grboudreau @ gmail DOT com and my website is www.GabeBoudreau.com for more information on the CEN Racing Matrix PRO and Truggy.

I appologize for not answering your question sooner, but I was in Murreita Friday and Saturday for this race and now am off to San Diego for a test day on the Matrix TR Arena truggy.

Regards,
Gabe Boudreau - CEN Factory Driver
www.GabeBoudreau.com/trophyroom.html

Here you go...I found these setup sheets on a different forum and made them PDF format!

Go ahead and download all you want! Unlimited band width to my site!

http://www.gabeboudreau.com/ARCRaceway111106.pdf
http://www.gabeboudreau.com/blanksetupsheetmatrix.pdf

Gabe

PS - Enjoy

thank you very much gabe...big help

how do you find the locked front diff?