gyro
12-02-2008 | 11:40 AM
#2
Joined: Aug 2007
Posts: 6,441
Likes: 0
Received 0 Likes
on
0 Posts
From: Lincoln,
NE
RE: gyro
Yeah you can use a gyro with a tail motor driven tail, but are you talking about the CPP? Because the only known gyros that work with the CP+ and CPP are the G90 and G110. But if you use a brushed speed controller for the tail motor then you can use any gyro you want.
Nick
Nick
12-02-2008 | 12:46 PM
#3
Joined: Mar 2008
Posts: 729
Likes: 0
Received 0 Likes
on
0 Posts
From: Indianapolis,
IN
RE: gyro
Yeah you can use a gyro with a tail motor driven tail, but are you talking about the CPP? Because the only known gyros that work with the CP+ and CPP are the G90 and G110. But if you use a brushed speed controller for the tail motor then you can use any gyro you want.
Nick
Nick
Uri
05-01-2009 | 05:44 AM
#5
Junior Member
Joined: May 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
From: , SINGAPORE
RE: gyro
ORIGINAL: evdreamer
Uri,
Thanks for the info. I just have never heard of anyone using the Telebee gyro before. But I do know the Futaba GY240 and 401 will not work.
Nick
Uri,
Thanks for the info. I just have never heard of anyone using the Telebee gyro before. But I do know the Futaba GY240 and 401 will not work.
Nick
05-01-2009 | 10:18 AM
#6
Joined: Aug 2007
Posts: 6,441
Likes: 0
Received 0 Likes
on
0 Posts
From: Lincoln,
NE
RE: gyro
Is there no way to set up gy240 using the stock esc on CP Pro? Do you know why this can't be done?
Nick
05-01-2009 | 12:20 PM
#7
Junior Member
Joined: May 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
From: , SINGAPORE
RE: gyro
ORIGINAL: evdreamer
You can use a GY240, but you have to have a brushed ESC connected to the tail motor and the throttle connector of that plug into the gyro. With out that brushed speed controller the tail motor RPM's won't be consistant in a way that the tail can be controlled. I don't know why it doesn't work, but me and a few other people couldn't get the GY240 or GY401 to work with the 3in1.
Nick
Is there no way to set up gy240 using the stock esc on CP Pro? Do you know why this can't be done?
Nick
05-01-2009 | 12:35 PM
#8
Joined: Aug 2007
Posts: 6,441
Likes: 0
Received 0 Likes
on
0 Posts
From: Lincoln,
NE
RE: gyro
This is the ESC I used when I had my CPP with a GY240.
http://www.eboyztoyz.net/index.php?op=showitem&sku=2334
Just unplug the red wire out of the throttle connector on this ESC before plugging it in the GY240.
Nick
http://www.eboyztoyz.net/index.php?op=showitem&sku=2334
Just unplug the red wire out of the throttle connector on this ESC before plugging it in the GY240.
Nick
