i just purchased 2 blade 400 one was has the radio and heli the other is the plun n play model. Question the plug and play heli how do i bind it to the
tx and this binding plug i am hearing about . do i have to purchase it separatly.I am new to this forum how ever i own several cp pros and walkera 22e's
and 53#1's .i decided to move up to a little better quality heli.

Hello Gaggy and welcome to our Forum!


http://secure.hobbyzone.com/catalog/.../EFLH1022.html way at the bottom of the link page is the picture!

I have provided you with a lik to Horizon Hobby to show you a picture of the binding plug. If you have some old parts you can make one too.


You plug the binding plug (BP) into the back of your receiver RX in the back of the 400. It is the only open post left so you can't miss it. Looking down the tail of the heli it is to the left side on the RX. You plug in the BP to the RX, then plug in your battery. Next with your left finger reach down on the longest bottom switch on your DX6i and lift it up and HOLD IT. Now with that held up turn on the TX and then you will see your RX and gyro flashing and on the DX6i you will see the wording BINDING. Once that stops (gyro) you are bound. take the BP off the heli. Unplug the battery, turnoff the TX and start over like to fly. You will turn on your TX, plug in the heli battery, and then in 3-7 seconds you should have a motor esc tone telling you, you are bound! Of course before all of this you need to have selected a model on the DX6i. Heres is something else that will really help you.

The Bible for 400's http://www.slyster.com/heli/b400bible.html

http://www.bladecprepair.com/#


Please feel free to PM mail me if you need more help........I was where you are a years ago and have three 400's. .JPee

Thanks alot ,now thats the kind of clear response and throughness i have been looking for in a forum
Bill

Gotch your back Bill. If I made any errors I am sorry as I was trying to respond to your plea for help but had to dash off to the doc's so was ah hammering the keys. But it appears I provided some homework at least for you!

Smiles JPee

I would also like to invite to where several of us 400 fliers are. are these blades any good for cp pro? page 164. We are on the main topic list generally right near the top.

JPee aka JPee
Nick aka evdreamer
Glenn aka rotarydoc
Jeff aka j-michael
Carl aka carljw
helistyle
evan aka evan t

But Bill with all that said, we are a nice group of guys who have numerous helis, so we walk T-REX, MCX, CPP, and more

Well it looks like JPee covered your question pretty well so yeah just do that