Struggling with single rotor basics V2
#8826
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Carol Stream,
IL
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Scott, have you made reservations for a camper spot for IRCHA? If so, can you tell me who to contact? I want to get a reservation in too.
#8829
My Feedback: (10)
Join Date: Apr 2008
Location: Ocala, FL
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Ivan - that's good news! Still almost another month - what a rotten deal! But maybe this time...
Scott - Everything I read said it was OK. I also put a bid on an AR7200bx on ebay, just in case! A room of your own - SWEET!!!
Chuck
Scott - Everything I read said it was OK. I also put a bid on an AR7200bx on ebay, just in case! A room of your own - SWEET!!!
Chuck
#8831
Senior Member
Join Date: Jan 2009
Location: Hartland,
MI
Posts: 3,119
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
ORIGINAL: clp.eng
Ivan - that's good news! Still almost another month - what a rotten deal! But maybe this time...
Scott - Everything I read said it was OK. I also put a bid on an AR7200bx on ebay, just in case! A room of your own - SWEET!!!
Chuck
Ivan - that's good news! Still almost another month - what a rotten deal! But maybe this time...
Scott - Everything I read said it was OK. I also put a bid on an AR7200bx on ebay, just in case! A room of your own - SWEET!!!
Chuck
Ihope you get the AR7200BX, Chuck. Ican help you with that. It's important to get the best FBLunit you can possibly afford or else you may get into a situation where buying low will end up costing you more in the long run due to crashes, frustration, etc.
Scott
#8832
My Feedback: (10)
Join Date: Apr 2008
Location: Ocala, FL
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Scott - pay someone to come in & rip the rugs off the floor & put in tile or pour cement or... LOL WOW, did I under bid! No BeastX for me! I guess I hope the ebar works as good as I'm told - the Internet never lies, right????
Now to figure out what servos to use - there are just too many to choose from & EVERYBODY has an opinion. LOL
Chuck
Now to figure out what servos to use - there are just too many to choose from & EVERYBODY has an opinion. LOL
Chuck
#8833
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Carol Stream,
IL
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Called this morning and reserved a spot with electricity for Thursday through Sunday. I haven't received my email conformation yet though.
#8834
Senior Member
Join Date: Jan 2009
Location: Hartland,
MI
Posts: 3,119
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Ivan,
Call back tomorrow. Icalled today and got the same. I'm calling again tomorrow for confirmation because the normal person was out sick today.
Scott
Call back tomorrow. Icalled today and got the same. I'm calling again tomorrow for confirmation because the normal person was out sick today.
Scott
#8835
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Carol Stream,
IL
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Will do Scott.
I uploaded some video I took at lunch with the QAV500 / Hero 3. Nothing super impressive but I thought it was cool.
[youtube]http://youtu.be/WbBY7SuCM0o[/youtube]
http://youtu.be/WbBY7SuCM0o
I uploaded some video I took at lunch with the QAV500 / Hero 3. Nothing super impressive but I thought it was cool.
[youtube]http://youtu.be/WbBY7SuCM0o[/youtube]
http://youtu.be/WbBY7SuCM0o
#8836
Senior Member
Join Date: Jan 2009
Location: Hartland,
MI
Posts: 3,119
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Called back this morning and was told that they'd be doing call backs in a day or so... they have stuff on a spreadsheet. Somehow, that's not too comforting as I called promptly at 8am Monday and repeatedly called until someone answered. If I don't get a spot at site 3, I'm going to be more than PO'ed.
Scott
Scott
#8838
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Carol Stream,
IL
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Just called AMA. We are good Scott. They are just trying to figure out if they are going to request paid in full or just a deposit. There are less than 15 people who requested spots so far.
#8839
My Feedback: (10)
Join Date: Apr 2008
Location: Ocala, FL
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Ivan -was that Chicago in the background?? What happened to the BluesMobile? Are there trout in that stream? LOL And Ikea seemed to enjoy it...
Chuck
Chuck
#8840
Senior Member
Join Date: Jan 2009
Location: Hartland,
MI
Posts: 3,119
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
ORIGINAL: 9sec240
Just called AMA. We are good Scott. They are just trying to figure out if they are going to request paid in full or just a deposit. There are less than 15 people who requested spots so far.
Just called AMA. We are good Scott. They are just trying to figure out if they are going to request paid in full or just a deposit. There are less than 15 people who requested spots so far.
Scott
#8841
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Carol Stream,
IL
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
ORIGINAL: clp.eng
Ivan -was that Chicago in the background?? What happened to the BluesMobile? Are there trout in that stream? LOL And Ikea seemed to enjoy it...
Chuck
Ivan -was that Chicago in the background?? What happened to the BluesMobile? Are there trout in that stream? LOL And Ikea seemed to enjoy it...
Chuck
Too far out for Chicago to be in view.
Arne has the Blues Mobile at his house.. The Hearse you can see in the video is his though. Here is a video that he put together from this past summer.
[youtube]https://www.youtube.com/watch?v=bgE6OS6GiCo[/youtube]
https://www.youtube.com/watch?v=bgE6OS6GiCo
IKEA loves anything RC. It is pretty crazy.
#8842
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Carol Stream,
IL
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
They have me working so hard at work...
[youtube]https://www.youtube.com/watch?v=ZQPdEa2fgYs[/youtube]
https://www.youtube.com/watch?v=ZQPdEa2fgYs
[youtube]https://www.youtube.com/watch?v=ZQPdEa2fgYs[/youtube]
https://www.youtube.com/watch?v=ZQPdEa2fgYs
#8843
My Feedback: (10)
Join Date: Apr 2008
Location: Ocala, FL
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Ivan - I forgot to ask about the hearse! Was that you getting out of the back?
So let me see, if you can build one engine in approximately 3 minutes, that's 20 an hour & for an eight hour day that's a total of160 a day. Wow, you're you're own production line! They probably aren't paying you enough!
Chuck
So let me see, if you can build one engine in approximately 3 minutes, that's 20 an hour & for an eight hour day that's a total of160 a day. Wow, you're you're own production line! They probably aren't paying you enough!
Chuck
#8846
My Feedback: (10)
Join Date: Apr 2008
Location: Ocala, FL
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Ivan - thanks!
Phil - welcome back.
1st pics of new build. Went to Value Hobby warehouse (0.7 mi from home) to pick up the servo & ESC. I had the motor & stripped the Rx out of my Cub J3.
PIC wouldn't upload.
Chuck
Phil - welcome back.
1st pics of new build. Went to Value Hobby warehouse (0.7 mi from home) to pick up the servo & ESC. I had the motor & stripped the Rx out of my Cub J3.
PIC wouldn't upload.
Chuck
#8848
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Carol Stream,
IL
Posts: 2,882
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Phil, my heart is with you brother!!
Chuck, it does not look like you go very far on your build at all????? WTH? LOL
Chuck, it does not look like you go very far on your build at all????? WTH? LOL
#8849
My Feedback: (10)
Join Date: Apr 2008
Location: Ocala, FL
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
This is what I get every time I try to upload a pic now!
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
Chuck
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
Chuck
#8850
Senior Member
Join Date: Jan 2009
Location: Hartland,
MI
Posts: 3,119
Likes: 0
Received 0 Likes
on
0 Posts
RE: Struggling with single rotor basics V2
Nothing you can do about a 500 error, Chuck. That's all server side.
So... Ivan... you da man! What cool videos! You know, back in the 60's AMT would have made a model of that Hearse! Loved the time lapse. You work very clean and meticulously. It's little wonder AMS builds the fastest GTR's and Hearses in the world. Very impressive!
Steak Thursday night at my moho, Ivan? Can't stop the tradition, bro!
Scott
So... Ivan... you da man! What cool videos! You know, back in the 60's AMT would have made a model of that Hearse! Loved the time lapse. You work very clean and meticulously. It's little wonder AMS builds the fastest GTR's and Hearses in the world. Very impressive!
Steak Thursday night at my moho, Ivan? Can't stop the tradition, bro!
Scott