Basic Servo Question
02-14-2006 | 02:10 PM
#1
Thread Starter
Member
Joined: Dec 2003
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
From: Belleville,
IL
Basic Servo Question
Is there a diff btwn the Fut vs JR version of the GWS Naro servos besides the color of the wires? I have all Fut and somehow ended up with a JR servo, seems to work just fine...am I doomed to fry something?
Thx,
Bill
Thx,
Bill
02-14-2006 | 02:50 PM
#2
My Feedback: (21)
Joined: Jul 2002
Posts: 7,350
Likes: 0
Received 0 Likes
on
0 Posts
From: Spencerport, NY
RE: Basic Servo Question
Two differences:
1. The color of the wires.
2. The shape of the connector.
Futabas have an alignment key to prevent you from plugging the servos in backwards. Otherwise, pin spacing and order are the same. As long as you keep the connectors in the same orientation (i.e. the little clippy-things that hold the pins in are facing the same direction), it doesn't matter which you use.
1. The color of the wires.
2. The shape of the connector.
Futabas have an alignment key to prevent you from plugging the servos in backwards. Otherwise, pin spacing and order are the same. As long as you keep the connectors in the same orientation (i.e. the little clippy-things that hold the pins in are facing the same direction), it doesn't matter which you use.
