RE: CA Models VISA
 

That's pretty much it. The split rudder comes in play for rolling and most of the maneuvers. It does increase the side area of the fuse. The best way I can describe it is that it does what electronic rudder expo is supposed to do. It really smooths out the rudder for maneuvers which require very little rudder input. Expo just doesn't act the same way. For spins, snaps, rolling loops and stall turns I use the rudders acting together like a standard rudder, I don't use split rudder for those maneuvers. The rudder has more authority that way.

The split rudder is great, but unless you are flying in FAI or Masters it really isn't worth the hassle to set it up and program it into your radio. You need to be comfortable flipping switches to activate and deactivate the split rudder. For some of the F11 and P11 maneuvers I will switch it on and off during the maneuver depending on which flight condition is active. The Visa and Passport can both be had with or without split rudder. They fly great both ways.

Steve

RE: CA Models VISA
 

Thanks again for the info. I would probably not use it at first but could grow into it if I have it. I'm also the kind of guy that would fly the heck out what I have for a long time so I don't really see it as a short term thing. I'm not sure what the wait period would be for a Visa these days plus the time it takes to complete at home. Would anyone here be selling last years plane? I could use it as a backup and take to my first contest while the Visa is being done.

RE: CA Models VISA
 

I am a believer in the benefit of the split rudder now that I have a few flights on my new Passport 2010. It is amazing how level the plane stays in knife edge. Should have my Visa in the air in the next couple weeks. I look forward to getting a comparison of the two planes.

I know this isn't the forum for buying and selling, but depending on what you are looking for, I am selling the Integral that I flew in the F3A finals last year. Best bet if interested is to contact me off-list at [email protected]

RE: CA Models VISA
 

Plettenburg, Schulze & TP Powered. APC 21=14. JR Guided.. 10#9oz. VISA flying REALLY well!!

RE: CA Models VISA
 

Sweet job dentdoc, that looks awesome. Love the lighting bolt on the nose and the red SFG's.

Keith

RE: CA Models VISA
 

Keith,
Almost done with your Visa, Just need to hook up the rudder and ailerons. I will be able to finish it up on Saturday.
Here are a couple of pics

RE: CA Models VISA
 

I'm encouraged to see I'm not the only one whose workbench gets outta hand during a build..... :eek:

Verne

RE: CA Models VISA
 

4 planes since Feb. so not a lot of time to clean. Maybe next week I hope

RE: CA Models VISA
 

Awesome Todd, looking good!

Looks like a trip to Waco is in my near future!

Keith

RE: CA Models VISA
 

Guys all the planes look good! ... since the plane is so good, I wonder which glow pilot will be the first to shoehorn a YS into it? Jim

RE: CA Models VISA
 

Thanks Kieth! She is a Keeper!
Wish I had Todd putting my stuff together! I went the ARC route thinking to save $$. Well I really took for granted how much the CAModel guys do in a ARF!
Well worth the extra coin! Will go that route on the next one... Solid White at least!

Jim, I bet YOU could do it! :D (will do it?) :D

Cameron Smith

RE: CA Models VISA
 

that's good looking airplane in the background !! heheh just kidding !!!

Plane looks good !! good job !!!

Braza

RE: CA Models VISA
 

Very nice Cameron!!!!!!!!!!! I hope it is what you expected and then some. As far as the shoehorning of a YS in the nose, the .63 will fit nicely but you better keep it lite. lol

Chip

RE: CA Models VISA
 

Here is a pic of the new Visa I came back to find waiting for me. I was planning on flying the Envision next week at the Nationals but I guess Marcelo likes it so much he wants it to himself. The first two Envisions are at the paint shop. Hoe to have some pics monday,

RE: CA Models VISA
 

Sweeeeeet they keep looking better and better.

Stephen

RE: CA Models VISA
 

Hey, Chip
Good Luck next week, I,know you will do well, will miss you at Fresno next weekend.
Could you, post a daily report.



Good Luck

RE: CA Models VISA
 

Thanks Jarvis and goodluck to all you guys this weekend as well.

RE: CA Models VISA
 

Hello everybody!
I´m from Argentina (second Chip´s country) and owner of a list of CA models airplanes since my first Epsilon followed by Genesis, Passport and now Visa.
I finished the airplane one week ago, and have to say it´s the very best airplane I´ve ever flight. From the bench work to the field I did exactly nothing to tune the plane. It´s perfect! No need of mix to correct command coupling, nothing at all!
Despite the excellent flight characteristics of the plane I´ve also to thanks Marcelo and Chip for their support, advices and help that allows me to win today the Intemediate class in my country.
For sure tomorrow Chip and Marcelo will beat everybody with the Visa and Envision on the FAI class.
Gustavo

RE: CA Models VISA
 

Maidened the Visa today. All I can say is that it is awesome. I have 2% mix on rudder - elevator, and that is pretty much it. I may be able to get rid of that mix by playing with the CG. I got 5 flights on it today and I am really looking forward to the long weekend and trying to get the Visa fine tuned. It is more a matter of getting me fine tuned and in synch with the plane (snap roll timing, etc). The plane really locked on from the beginning. Now I am anxious to get my second Visa completed and in the air. I think that these two Visas plus the Pass-port 2010 will give me a great stable of planes. Thanks to Chip, Marcelo and everyone at CA Models for all their help. A thank you also goes out to Todd Blose for answering numerous questions during the build.

Here are some pics from today's flying.....

RE: CA Models VISA
 

Mike,
Looks awesome! I trust we'll see you flying it for D4 at the Shootout next weekend?

Verne

RE: CA Models VISA
 

That's my plan Verne. Thanks for the compliment, the CA guys did a great job.

RE: CA Models VISA
 

Mike,

Your Visa looks awesome, although every picture of that plane so far has been stunning. Great lines and even cooler paint jobs. See you at the NATS,

Arch

RE: CA Models VISA
 

Thanks Arch.....looks are one thing, but if you haven't flown one yet, get your hands on one.....incredible! I am up early and in the shop working on getting the second one ready. I have 21 flights on the first Visa and it feels like I have hundreds on it. Chip and Marcelo did a really good job on this one. It is a lot of fun to fly.

RE: CA Models VISA
 

WOW is all I can say. Today has been one of the best days of flying I have ever had, without flying lol. We were stuck at the factories all day finishing a few planes but the reports that were coming in from across the US were more then enough inspiration to keep going.

Jason is out in 100 degree temps and 95% humidity fine tuning his Envision, while Mike K has been having a blast with his Visa in Muncie. Then all he way out west to Whittier Ca where I know Tony is flying the Onas as well as Matt Kimbro, Leon, Bob, and the Steve's have their Visa\Passports hooked up. Here are a few pics of the planes we are getting finished for the Nats.

Good luck to you guys as well as everyone else, I wish I was there.

More later it´s Fajita Night down here and I am starving

C

RE: CA Models VISA
 

Did Matt get his going? I came home from China with a nasty sinus infection and am grounded here at home this weekend. I had to miss Whittier, damn...

Steve