fms calibration problem
11-16-2004 | 07:36 AM
#1
Thread Starter
Junior Member
Joined: Nov 2004
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
From: , ISRAEL
fms calibration problem
i have problems calibrating the esky rc with fms any ideas.
my computer (WIN 98, sis display card and the rc is connected to COM1) gets the signal from my rc but i cant figure out which channel is connected to which stick on the rc,
when i calibrate more then 2 bars move and when the stick returns to the middle
the bars do not return to the center position.
any ideas? may be i am missing a setup property or a driver missing.
my computer (WIN 98, sis display card and the rc is connected to COM1) gets the signal from my rc but i cant figure out which channel is connected to which stick on the rc,
when i calibrate more then 2 bars move and when the stick returns to the middle
the bars do not return to the center position.
any ideas? may be i am missing a setup property or a driver missing.
11-16-2004 | 04:01 PM
#2
Member
Joined: Jul 2004
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
From: Vancouver, BC, CANADA
RE: fms calibration problem
A quick search on this forum reveals:
[link=http://www.rcuniverse.com/forum/fb.asp?m=2290994&key=]this[/link]
[link=http://www.rcuniverse.com/forum/fb.asp?m=2288254]and this.[/link]
[link=http://www.rcuniverse.com/forum/fb.asp?m=2290994&key=]this[/link]
[link=http://www.rcuniverse.com/forum/fb.asp?m=2288254]and this.[/link]
11-17-2004 | 02:16 AM
#3
Senior Member
Joined: Oct 2003
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
From: dublin, CA,
RE: fms calibration problem
Off topic Nice Miata I drive a 94 white Konis race beat springs and swaybars I have AC'ed a few times Love my car almost as much as my RC habit Did I say Habit I mean hobby
