lipos
01-15-2006 | 03:33 PM
#1
Thread Starter
My Feedback: (13)
Joined: Jan 2002
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
From: CANTON, MI
lipos
I have a hacker B40 11s in a Skyray,what would be the best pack to run with unit ?
4S1P 2500,3100,Etc and I would like a run time of at least 7 minutes
Thank You
James Smith
4S1P 2500,3100,Etc and I would like a run time of at least 7 minutes
Thank You
James Smith
01-17-2006 | 03:54 PM
#4
Senior Member
Joined: Feb 2004
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
From: Cincinnati,
OH
RE: lipos
James,
I am going to assume you mean a Minifan 480 sized Skyray. A 3S1P Kokam 3200 pack should give you around 375-400 watts of power with a run time of around 6-7 minutes, or more with throttle management. If you use the motor with a 4S pack, the Minifan 480 will produce too much load and would most likely burn up the Hacker B40-11S motor.
With the 3S Lipo, make sure you have a pack that can supply at least 45 amps or more.
Carl
I am going to assume you mean a Minifan 480 sized Skyray. A 3S1P Kokam 3200 pack should give you around 375-400 watts of power with a run time of around 6-7 minutes, or more with throttle management. If you use the motor with a 4S pack, the Minifan 480 will produce too much load and would most likely burn up the Hacker B40-11S motor.
With the 3S Lipo, make sure you have a pack that can supply at least 45 amps or more.
Carl
