Have a BCX2 and using it's TX with FMS software....think it helps me in actual flight
...can fly around pretty good...having trouble fly longer distance with speed
and trying to land...can do it OK with short distance and small speed....
the question seems to be...how to bring the Heli to hover from speed without
slowing down forever and forever...thanks in advance for any help...not sure this
the right forum...looked at forums and couldn't see one for sims with heli...John H.

your problem might be that you are using a cx2 model in the sim =P anyways, beyong that you are going to want to do the exact reverse cyclic of the direction you are going, so if you are flying tail in and the tail is comming straight at you, give it lots of forward cyclic (of coarse not enough to give you blade clack), and ease back on the throttle or you will zom up in the air. As the heli slows down and goes back into a hover you'll have to increase the theottle again so you don't loose alt and fall into the ground.

hopefully that is what you were asking for =)

Does anyone know a site to get a cx2 sim for the fms . I searched their sites and couldnt find any .[sm=spinnyeyes.gif]