I have a J3 cup foamie and brok the wing at fuse,should I use eproxy of foam ca anf tape to repair.
wattmeter

My personal choice would be epoxy, though if it is an extremely clean break, CA might work. Epoxy will do a better job if the break is irregular. - Jeff

Thank jeff
I have never worked aroud foam before and was not surt what to use.
Again Thanks
Bill

Hi Wattmeter,</p>

For a broken wing repair, you should include some sort of reinforcement.  A carbon fiber rod is best, but you can also use a wooden skewer, a plastic rod, etc.  Basically, anything that is light but rigid to keep the wing from flexing at the break.</p>