McCulloch 32 cc disassembly??
10-01-2003 | 02:49 PM
#2
Senior Member
RE: McCulloch 32 cc disassembly??
On my Mac I put a flat head screwdriver down the center of the clutch bell and just unscrewed it. Most all of the stuff will come off then leaving just the clutch shoes that aslo will then unscrew off the shaft if I remember right. Mike
10-07-2003 | 02:38 PM
#5
My Feedback: (1)
Joined: Jan 2002
Posts: 3,114
Likes: 0
Received 0 Likes
on
0 Posts
From: Riverton,
WY
RE: McCulloch 32 cc disassembly??
This is a secret, so you cant tell anybody
Remove the spark plug and stuff about 1 ft of a small rope in the spark plug hole. Turn the engine over untill it locks up. Then use a t-25 TORX ( I think thats the size) and losen the bolt. Take off the clutch housing, remove the plastic engine housing AND then wack the clutch with a small hammer and it will unscrew.
Remove the spark plug and stuff about 1 ft of a small rope in the spark plug hole. Turn the engine over untill it locks up. Then use a t-25 TORX ( I think thats the size) and losen the bolt. Take off the clutch housing, remove the plastic engine housing AND then wack the clutch with a small hammer and it will unscrew.
