A cdi design starting point
#1
Member
Thread Starter
My Feedback: (5)
Join Date: Mar 2003
Location: Tyler,
TX
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
A cdi design starting point
For those interested in tinkering with a little electronics. The wegsite has the code and board drawings for an atmel microcontroller base cdi. He has several versions all with code and schmatics. The site is in French so you will need to use google's language translator if you can't read French. He design them to fix his ignition on a motorcycle. Its good info for those who want to try a hand at making their own electronic advance timing system for a conversion rc motor.
http://perso.wanadoo.fr/transmic/
http://perso.wanadoo.fr/transmic/
#2
Senior Member
Join Date: Feb 2004
Location: Buenos Aires, ARGENTINA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
RE: A cdi design starting point
try www.hpignitions.com.ar they have all the problems solved for a few dollars
#3
Senior Member
My Feedback: (1)
RE: A cdi design starting point
the french site should also have a simpler PIC based ignition that looks good. very easy to look at the code and see what's going on there. most pages are available in english too, just start out at the home page.
happy chip burning
dave
happy chip burning
dave