Carb only has low needle?
08-04-2005 | 10:30 PM
#1
Thread Starter
Member
My Feedback: (9)
Joined: Jan 2004
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
From: Marana, AZ
Carb only has low needle?
I have a carb with 0nly a low needle. The location for the high needle is there, but looking into the hole, all I see is a brass looking cap or cover down in the hole. Is there a short needle down there? are the threads there? How do you remove the brass looking thing? What's the fix?
SIDES7
SIDES7
harmful emissions...Get a carb with a high speed needle, that one can't be made to work...
08-05-2005 | 12:12 AM
#3
Senior Member
My Feedback: (29)
Joined: Jan 2005
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
From: San Antonio,
TX
RE: Carb only has low needle?
Hi,
I had a carb that had the high speed needle hidden under RTV in a hole. I removed the RTV and there was my needle. Maybe there is a needle under your cap. Try to pop it out with a knife or drill it out carefully. What do you have to lose?
Dave
I had a carb that had the high speed needle hidden under RTV in a hole. I removed the RTV and there was my needle. Maybe there is a needle under your cap. Try to pop it out with a knife or drill it out carefully. What do you have to lose?
Dave
