Crankshaft sizes
07-12-2006 | 09:29 PM
#1
Thread Starter
Senior Member
My Feedback: (5)
Joined: May 2004
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
From: Ft. Oglethorpe,
GA
Crankshaft sizes
What sizes are the threaded parts of the Mac 32cc weedeater engines crankshaft? I need to know how to tell the size for possible switch to electronic ignition.
Thanks
Joel
Thanks
Joel
07-12-2006 | 10:34 PM
#2
Senior Member
My Feedback: (29)
Joined: Jan 2005
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
From: San Antonio,
TX
RE: Crankshaft sizes
Hi jlang.
Of the two that I have, one is a 5/16x24 and the other is a 1/2 inch thread. You can measure the diameter and count the threads. Example, 5/16x24 would be 5/16 diameter and have 12 threads in one half inch of lenght. You could alwaye take it to a good hardware store and match it up with the correct nut.
Dave
Of the two that I have, one is a 5/16x24 and the other is a 1/2 inch thread. You can measure the diameter and count the threads. Example, 5/16x24 would be 5/16 diameter and have 12 threads in one half inch of lenght. You could alwaye take it to a good hardware store and match it up with the correct nut.
Dave
